I purchased a phantom 4 pro plus about a month ago. Every since I purchased my drone I've been looking for the perfect case to store it and transported it. I'm not going to put $2500 drone and accessories in just any case, the case has to be well made to perfectly fit and protect my drone and accessories in transit. Eureka I found a perfect case by MC-Cases a German company. The person who designed this case either has a drone, very detailed oriented or both, this case has everything.
First, it cradles my drone like a mother cradles a new born. High density foam (not the cheap stuff) it's cut to the precise shape of the drone and accessories. Notice the cutout to accommodate the camera and the gimbal guard in the drone shaped cutout. It has a cushion to stabilize the gimbal and camera without cover. Also notice how the motor housing is supported by foam under and around it. Since I have a P4P+ my control has a monitor on it, this case has a cushion between the control and the monitor, so if sharp impact happens the monitor will not get damaged by making contact with the body of the remote controller, this is the first case I've seen with this feature.
Second, it accommodate accessories and precision cutouts for the power supply, cables, an iPad, memory cards and six batteries. That's correct six batteries, (one in the drone, three in the main compartment of the case and two in the storage compartment). The battery locations are NOT just deep rectangular holes that stop at the bottom of the case, they ARE cut to the shape and depth of the battery,
Third, a storage compartment with a lid, this is another first. The storage compartment is long enough to store extra blades (which are normally the longest item to store) and other accessories with or without the two batteries. More importantly it can store small items that will not get misplaced in the case because they are confined to the storage area by the lid.
And finally, the exterior. The exterior is molded plastic that is strong but light weight. The most impressive part about it exterior are the clasp. There are four exterior clasps (two on the top and one on each side). The clasp don't have to be pulled loose like the Pelican case, these clasp are lift and release (my term for the clasp). Lift from the bottom to release and unhook at the top of the case, so every open and closure is easy on the fingers and the case is securely closed or easily opened. It also has holes for a paddled shoulder strap and separate holes to secure the case with two padlocks.
Overall - I like everything about this case, it's strong but lightweight, it manages interior space well, it has storage compartment with a lid, the high density foam with red topper is protective and looks good, easy open and close, the case looks good when carrying and you can purchase a padded shoulder strap.
Reviews with images
Eureka! The perfect drone case.
I purchased a phantom 4 pro plus about a month ago. Every since I purchased my drone I've been looking for the perfect case to store it and transported it. I'm not going to put $2500 drone and accessories in just any case, the case has to be well made to perfectly fit and protect my drone and accessories in transit. Eureka I found a perfect case by MC-Cases a German company. The person who designed this case either has a drone, very detailed oriented or both, this case has everything.First, it cradles my drone like a mother cradles a new born. High density foam (not the cheap stuff) it's cut to the precise shape of the drone and accessories. Notice the cutout to accommodate the camera and the gimbal guard in the drone shaped cutout. It has a cushion to stabilize the gimbal and camera without cover. Also notice how the motor housing is supported by foam under and around it. Since I have a P4P+ my control has a monitor on it, this case has a cushion between the control and the monitor, so if sharp impact happens the monitor will not get damaged by making contact with the body of the remote controller, this is the first case I've seen with this feature.Second, it accommodate accessories and precision cutouts for the power supply, cables, an iPad, memory cards and six batteries. That's correct six batteries, (one in the drone, three in the main compartment of the case and two in the storage compartment). The battery locations are NOT just deep rectangular holes that stop at the bottom of the case, they ARE cut to the shape and depth of the battery,Third, a storage compartment with a lid, this is another first. The storage compartment is long enough to store extra blades (which are normally the longest item to store) and other accessories with or without the two batteries. More importantly it can store small items that will not get misplaced in the case because they are confined to the storage area by the lid.And finally, the exterior. The exterior is molded plastic that is strong but light weight. The most impressive part about it exterior are the clasp. There are four exterior clasps (two on the top and one on each side). The clasp don't have to be pulled loose like the Pelican case, these clasp are lift and release (my term for the clasp). Lift from the bottom to release and unhook at the top of the case, so every open and closure is easy on the fingers and the case is securely closed or easily opened. It also has holes for a paddled shoulder strap and separate holes to secure the case with two padlocks.Overall - I like everything about this case, it's strong but lightweight, it manages interior space well, it has storage compartment with a lid, the high density foam with red topper is protective and looks good, easy open and close, the case looks good when carrying and you can purchase a padded shoulder strap.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on February 27, 2017
I purchased a phantom 4 pro plus about a month ago. Every since I purchased my drone I've been looking for the perfect case to store it and transported it. I'm not going to put $2500 drone and accessories in just any case, the case has to be well made to perfectly fit and protect my drone and accessories in transit. Eureka I found a perfect case by MC-Cases a German company. The person who designed this case either has a drone, very detailed oriented or both, this case has everything.
First, it cradles my drone like a mother cradles a new born. High density foam (not the cheap stuff) it's cut to the precise shape of the drone and accessories. Notice the cutout to accommodate the camera and the gimbal guard in the drone shaped cutout. It has a cushion to stabilize the gimbal and camera without cover. Also notice how the motor housing is supported by foam under and around it. Since I have a P4P+ my control has a monitor on it, this case has a cushion between the control and the monitor, so if sharp impact happens the monitor will not get damaged by making contact with the body of the remote controller, this is the first case I've seen with this feature.
Second, it accommodate accessories and precision cutouts for the power supply, cables, an iPad, memory cards and six batteries. That's correct six batteries, (one in the drone, three in the main compartment of the case and two in the storage compartment). The battery locations are NOT just deep rectangular holes that stop at the bottom of the case, they ARE cut to the shape and depth of the battery,
Third, a storage compartment with a lid, this is another first. The storage compartment is long enough to store extra blades (which are normally the longest item to store) and other accessories with or without the two batteries. More importantly it can store small items that will not get misplaced in the case because they are confined to the storage area by the lid.
And finally, the exterior. The exterior is molded plastic that is strong but light weight. The most impressive part about it exterior are the clasp. There are four exterior clasps (two on the top and one on each side). The clasp don't have to be pulled loose like the Pelican case, these clasp are lift and release (my term for the clasp). Lift from the bottom to release and unhook at the top of the case, so every open and closure is easy on the fingers and the case is securely closed or easily opened. It also has holes for a paddled shoulder strap and separate holes to secure the case with two padlocks.
Overall - I like everything about this case, it's strong but lightweight, it manages interior space well, it has storage compartment with a lid, the high density foam with red topper is protective and looks good, easy open and close, the case looks good when carrying and you can purchase a padded shoulder strap.
First, it cradles my drone like a mother cradles a new born. High density foam (not the cheap stuff) it's cut to the precise shape of the drone and accessories. Notice the cutout to accommodate the camera and the gimbal guard in the drone shaped cutout. It has a cushion to stabilize the gimbal and camera without cover. Also notice how the motor housing is supported by foam under and around it. Since I have a P4P+ my control has a monitor on it, this case has a cushion between the control and the monitor, so if sharp impact happens the monitor will not get damaged by making contact with the body of the remote controller, this is the first case I've seen with this feature.
Second, it accommodate accessories and precision cutouts for the power supply, cables, an iPad, memory cards and six batteries. That's correct six batteries, (one in the drone, three in the main compartment of the case and two in the storage compartment). The battery locations are NOT just deep rectangular holes that stop at the bottom of the case, they ARE cut to the shape and depth of the battery,
Third, a storage compartment with a lid, this is another first. The storage compartment is long enough to store extra blades (which are normally the longest item to store) and other accessories with or without the two batteries. More importantly it can store small items that will not get misplaced in the case because they are confined to the storage area by the lid.
And finally, the exterior. The exterior is molded plastic that is strong but light weight. The most impressive part about it exterior are the clasp. There are four exterior clasps (two on the top and one on each side). The clasp don't have to be pulled loose like the Pelican case, these clasp are lift and release (my term for the clasp). Lift from the bottom to release and unhook at the top of the case, so every open and closure is easy on the fingers and the case is securely closed or easily opened. It also has holes for a paddled shoulder strap and separate holes to secure the case with two padlocks.
Overall - I like everything about this case, it's strong but lightweight, it manages interior space well, it has storage compartment with a lid, the high density foam with red topper is protective and looks good, easy open and close, the case looks good when carrying and you can purchase a padded shoulder strap.
Images in this review
Reviewed in the United States on February 20, 2017
This case I purchased a while back and it has been in all honesty the best case i have every bought for any of my drones.
Instead of trying to tell you what the description already does a great job at, i will tell you how i am using it and what all i have managed to shove in this case. When i save shove, i mean comfortably placed, not the vision that may pop in you head of a case bulging about ready to explode..
Here it goes.
I have the Phantom 4 Pro, Normal remote (not the builtin display)
4 Batteries, One in the drone and 3 in the case. (one missing in picture it was charging)
I have the cables in the cut outs and memory card cases in the slits.
I dont leave my blades on although i could.
In the larger slit i have my shade for the remote, show i need it (But if you dont store the shade, it can hold an iPad)
In the larger cut our storage i keep, 2 sets of blades, Polar Pro filters, USB Cables, Lanyard and Lens cleaning supplies
Also i have the DJI charging hub in that same cutout. (It holds alot)
And believe it or not there is still a little more room.
I absolutely love the MC-CASES and only use MC-CASES for my drones
They are, without a doubt, the best case out there if you want to protect your investment In my honest opinion.
The craftsman ship is amazing, the case is solid and can be locked. with TSA approved locks.
I absolutely recommend this case and would happily endorse this product.
Instead of trying to tell you what the description already does a great job at, i will tell you how i am using it and what all i have managed to shove in this case. When i save shove, i mean comfortably placed, not the vision that may pop in you head of a case bulging about ready to explode..
Here it goes.
I have the Phantom 4 Pro, Normal remote (not the builtin display)
4 Batteries, One in the drone and 3 in the case. (one missing in picture it was charging)
I have the cables in the cut outs and memory card cases in the slits.
I dont leave my blades on although i could.
In the larger slit i have my shade for the remote, show i need it (But if you dont store the shade, it can hold an iPad)
In the larger cut our storage i keep, 2 sets of blades, Polar Pro filters, USB Cables, Lanyard and Lens cleaning supplies
Also i have the DJI charging hub in that same cutout. (It holds alot)
And believe it or not there is still a little more room.
I absolutely love the MC-CASES and only use MC-CASES for my drones
They are, without a doubt, the best case out there if you want to protect your investment In my honest opinion.
The craftsman ship is amazing, the case is solid and can be locked. with TSA approved locks.
I absolutely recommend this case and would happily endorse this product.
Images in this review
Reviewed in the United States on April 12, 2018
Phantom 4 Pro fits perfectly. High density foam. Fits iPad Pro 10.5 and still have a little bit more room.
Reviewed in the United States on April 12, 2018
The laser cut is clean. The case is smaller than what I thought it was going to be but still lots of room. It will definitely protect your drone. If you want to leave the propellers on, removing the gimbal clamp helps. The convoluted foam at the bottom holds the camera securely. When you close the case it pushes the remote antenna a little bit but it’s the foam pushing it so no worries of breaking it. Only complaint is it has minor scratches on the bottom of the case and a little dusty outside. I wish it came with a shoulder strap. If you’re looking for a good protective case, get this one.
Reviewed in the United States on April 12, 2018
Images in this review
Reviewed in the United States on May 28, 2017
Top reviews from other countries
EconGuuy
Better than Nanuk 945 in every way
Reviewed in Canada on July 31, 2017
EconGuuy
Reviewed in Canada on July 31, 2017
Overall, MC-Cases has made an outstanding case to fit a phantom 4 with props on in such a compact size for what it does. I will be returning the Nanuk 945. I'd recommend it.
Images in this review
Flying Spanner
Very happy with this quality product
Reviewed in the United Kingdom on December 31, 2017