The case itself seems quite sturdy but the cut is off. The remote for the Phantom 4 Pro Plus will not fit without modification, which can be done but I was under the impression no modification would be needed for the Pro plus controller. I have a few days to decide but I am leaning to sending it back. Overall I would not recommend this case.
UPDATE
OK, I contacted the manufacturer by their website. They were prompt in getting back to me. They asked I send them some pictures which I did. In addition to the mold not fitting the controller, one corner had a hole where it seemed that when the mold came out something ripped it. Without any fuss the sent me a new case and mold. They stood by their product and treated my fairly. Now that I have the new case everything fits perfectly. Based on a proper fitting foam insert I give this case 5 stars and the company 5 stars for their prompt and professional service. I have used it already in the field and it works great!
Similar item to consider
Customers also viewed these products
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
Nanuk 950 Hard Case
Its polyurethane wheels are smooth on all surfaces and the one-handed retractable handle gets you from point A to B without breaking a sweat. The same tough PowerClaw superior latching system, indestructible and impenetrable NK-7 resin shell but with wheeled convenience.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Cubed Foam | Padded Divider | TSA-Approved Lock | Shoulder Strap | TSA Lockable Latch | Desiccant Container | |
|
|
|
|
||||
| Customer Reviews |
2
|
1
|
1,212
|
673
|
417
|
30
|
| Price | — | — | $18.35 | $20.00 | $29.99 | — |
| Compatible | ✓ | ✓ | ✓ | ✓ | ✓ |
|
|
|
|
|
|
|---|---|---|---|---|---|
| Nanuk 940 Family Large Hard Case | Nanuk 945 Family Large Hard Case | Nanuk 950 Family Wheeled Hard Case | Nanuk 955 Family Wheeled Hard Case | Nanuk 960 Family Wheeled Hard Case | |
|
|
|
||||
| Customer Reviews |
12
|
196
|
113
|
36
|
183
|
| Price | $184.95 | $214.95 | $254.95 | — | — |
| Interior Size | 20 × 14 × 8" | 508 x 356 x 203 mm | 22 × 17 × 8.2” | 559 x 432 x 208 mm | 22 × 17 × 10.2″ | 559 x 432 x 259 mm | 22 × 17 × 10.2″ | 559 x 432 x 259 mm | 22 × 17 × 12.9” | 559 x 432 x 328 mm |
| Exterior Size | 21.7 × 16.9 × 8.5” | 557 x 429 x 216 mm | 25.1 × 19.9 × 8.8” | 638 x 505 x 224 mm | 25.6 × 20 × 11.8″ | 650 x 508 x 300 mm | 25.6 × 20 × 11.8″ | 650 x 508 x 300 mm | 25.4 × 20 × 14.5” | 645 x 508 x 368 mm |
| Internal Volume | 2240 cu.in | 1.29 cu.ft | 36.0 L | 3067 cu.in | 1.77 cu.ft | 50.0 L | 3815 cu.in | 2.2 cu.ft | 61.0 L | 3815 cu.in | 2.2 cu.ft | 61.0 L | 4825 cu.in | 2.79 cu.ft | 76.0 L |
| Weight (Empty) | 8.4 lb | 3.8 kg | 10.6 lb | 4.8 kg | 18.40 lb | 8.16 kg | 18.40 lb | 8.16 kg | 19.2 lb | 8.7 kg |
| Available Colors | Black, Orange, Yellow, Silver, Olive and Graphite | Black, Orange, Yellow, Silver, Olive and Graphite | Black, Orange, Yellow | Black, Orange, Yellow | Black, Orange, Yellow, Olive and Graphite |
| Padded Divider Option | ✓ | ✓ | ✓ | ✓ | ✓ |
| Cubed Foam Option | ✓ | ✓ | ✓ | ✓ | ✓ |
| Empty Option | ✓ | ✓ | ✓ | ✓ | ✓ |
| Wheels | ✓ | ✓ | ✓ |
Nanuk stands behind the quality of its products for life.
Made in Canada
NANUK cases are designed and manufactured in Canada and are tested in some of the harshest conditions, including our own backyards.
Every NANUK case is made to last. For this reason if there is ever a problem with your case it can either be repaired and returned or replaced.
NANUK designs and builds their cases for unforgiving environments. Where better to do that than in Canada?
In fact, only Switzerland and Japan rank higher in terms of reputation for making high-quality products globally!
NANUK believes that there’s no better setting than the cold, harsh conditions of Canada to make cases that protect valuable equipment.
The Nanuk Advantage
|
|
|
|
|---|---|---|
Dustproof, Lightweight & IndestructibleImpact-resistant, lightweight, and armed with NK-7 resin body, NANUK protective cases are designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents. |
Powerclaw Superior Latching SystemEnsuring that your gear stays well protected from the elements, NANUK cases patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you. |
WaterproofNANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in –nothing! |
Compare with similar items
This Item  Nanuk DJI Drone Waterproof Hard Case with Wheels and Custom Foam Insert for DJI Phantom 4/ Phantom 4 Pro (Pro+) / Advanced (Advanced+) & Phantom 3 - Olive |  |  |  |  | |
| Price | Currently unavailable. | $264.95 | $283.97 | $283.97 | $283.97 |
| Delivery | — | Get it as soon as Tuesday, Apr 30 | Get it as soon as Monday, Apr 29 | Get it as soon as Monday, Apr 29 | Get it as soon as Wednesday, May 1 |
| Customer Ratings | |||||
| Quality of material | |||||
| For traveling | |||||
| Durability | |||||
| Value for money | |||||
| Sold By | — | Amazon.com | Amazon.com | Amazon.com | Amazon.com |
| material | Plastic | Plastic | Plastic | Plastic | Plastic |
| number of items | — | 1 | 1 | 1 | 1 |
| closure type | Toggle | Toggle | Toggle | Toggle | Toggle |
Reviews with images
Almost Perfect, But....
This is my fifth Nanuk drone case and, for the most part, I've been pretty pleased with their products. However, I've noticed on my last two cases (separate purchases) the quality control of the foam insert is slightly off.In this case for the Phantom 4 Pro+, the top layer of foam was not cut properly in one corner, making it difficult for the Pro+ controller to fit without putting pressure on the screen (see first three photos) and having to force it in/out. Since this case was designed for multiple versions of the Phantom, I tried every other angle (as shown in the product video) but could not get it to fit any other way. This wouldn't affect controllers without a built-in screen.It is a relatively easy fix for some people, just cut the foam with a very sharp blade (however, it will never look as nice as the laser cuts from the factory). At this price point and with their reputation, I would hope that a Nanuk case wouldn't need modifying on arrival. This is why I knocked off one star.Otherwise, this is the best case for a Phantom I've seen. I particularly like the fact that it fits everything I have and it accommodates leaving the blades on - even the "low-noise" ones. The two pieces of foam that hold the blades in place actually move up and down (see the last photo) to allow different blade types. It feels very substantial and durable, and I have no doubt that my expensive toys are protected inside.Almost perfect...almost.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on November 8, 2019
Nanuk 950 is the BEST hard case for a drone on the market!
Reviewed in the United States on November 8, 2019
In terms of price, this is the BEST hard case for the Phantom 4 in my opinion. I’ve had a pelican (way too expensive) as well as an SKB and although they are good, this one takes the cake. Every element fits perfectly. Very snug so you know your investment is safe and secure. Everything looks high quality and feels super sturdy. If you’re on the fence or can’t decide which hard case to get, I promise you will not be disappointed with the Nanuk 950
Reviewed in the United States on November 8, 2019
Images in this review
Reviewed in the United States on February 7, 2018
Reviewed in the United States on March 3, 2019
Style: 950 Phantom 4Color: YellowVerified Purchase
This is my fifth Nanuk drone case and, for the most part, I've been pretty pleased with their products. However, I've noticed on my last two cases (separate purchases) the quality control of the foam insert is slightly off.
In this case for the Phantom 4 Pro+, the top layer of foam was not cut properly in one corner, making it difficult for the Pro+ controller to fit without putting pressure on the screen (see first three photos) and having to force it in/out. Since this case was designed for multiple versions of the Phantom, I tried every other angle (as shown in the product video) but could not get it to fit any other way. This wouldn't affect controllers without a built-in screen.
It is a relatively easy fix for some people, just cut the foam with a very sharp blade (however, it will never look as nice as the laser cuts from the factory). At this price point and with their reputation, I would hope that a Nanuk case wouldn't need modifying on arrival. This is why I knocked off one star.
Otherwise, this is the best case for a Phantom I've seen. I particularly like the fact that it fits everything I have and it accommodates leaving the blades on - even the "low-noise" ones. The two pieces of foam that hold the blades in place actually move up and down (see the last photo) to allow different blade types. It feels very substantial and durable, and I have no doubt that my expensive toys are protected inside.
Almost perfect...almost.
In this case for the Phantom 4 Pro+, the top layer of foam was not cut properly in one corner, making it difficult for the Pro+ controller to fit without putting pressure on the screen (see first three photos) and having to force it in/out. Since this case was designed for multiple versions of the Phantom, I tried every other angle (as shown in the product video) but could not get it to fit any other way. This wouldn't affect controllers without a built-in screen.
It is a relatively easy fix for some people, just cut the foam with a very sharp blade (however, it will never look as nice as the laser cuts from the factory). At this price point and with their reputation, I would hope that a Nanuk case wouldn't need modifying on arrival. This is why I knocked off one star.
Otherwise, this is the best case for a Phantom I've seen. I particularly like the fact that it fits everything I have and it accommodates leaving the blades on - even the "low-noise" ones. The two pieces of foam that hold the blades in place actually move up and down (see the last photo) to allow different blade types. It feels very substantial and durable, and I have no doubt that my expensive toys are protected inside.
Almost perfect...almost.
Images in this review
Reviewed in the United States on September 17, 2019
Style: 950 Phantom 4Color: BlackVerified Purchase
I just got this case and was amazed how well it was built. Very nice drone case and has deep pockets.
I have 3sets of propellers and there is still plenty of room without worrying about bending in a tight case like my inspire 2 case.
I have 3sets of propellers and there is still plenty of room without worrying about bending in a tight case like my inspire 2 case.
Images in this review
Top reviews from other countries
Adnan Nayyer
Best Price
Reviewed in Canada on July 18, 2018Style: 950 Phantom 4Color: BlackVerified Purchase
Richard
this case is just amazing
Reviewed in Canada on October 4, 2020Style: 950 Phantom 4Color: BlackVerified Purchase
NELSON S THALL
Best buy.
Reviewed in Canada on September 13, 2020Style: 950 Phantom 4Color: BlackVerified Purchase
dronestoronto
Good product
Reviewed in Canada on November 27, 2018Style: 950 Phantom 4Color: BlackVerified Purchase
